|
This new flagship spearheads Shuttle's squad of high-performance Mini-PCs. It is based on the Intel X58 Express Chipset making to ready to run Intel Core i7 processors for the first time. A fast processor is of course nothing without a lot of memory. Up to 16GB of blazingly fast DDR3 modules are supported by four DIMM slots. To complement this, the SX58H7 already comes supplied with two Gigabit network connectors. Concentrated performance in a small space - so even applications from the professional sector as well as brand-new games do not present any problem at all for the XPC Barebone SX58H7.
- Chassis
H7-type aluminum chassis, color: black
Front panel with glossy finish and painted, shining top cover
storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
stealthed drive doors
Dimensions: 32.5 x 20.8 x 18.9 cm (LWH), 12.8 litres
Weight: 3.8 kg net / 5.2 kg gross
- Mainboard
Shuttle FX58, Shuttle form factor, proprietary design for XPC SX58H7
Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Conroller Hub)
Solid Capacitors for excellent heat resistance for enhanced system durability
- Power supply
500 Watt mini PSU, AC input voltage: 100~240V
80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
Active PFC circuit (Power Factor Correction)
- Processor support
Socket 1366 supports
Intel® Core™ i7 models 920 (2.66 GHz), 940 (2.93 GHz), 965XE (3.2 GHz)
The previous Front Side Bus (FSB) by the new QPI (QuickPath Interconnect)
which features up to 6.4GT/s (3.2GHz) and a maximum transfer rate of 25.6GB/s.
Supports Dynamic Overclock feature (DOC):
Easily overclock function to be enabled through a simple BIOS setting.
- New heatpipe processor cooling
Shuttle Integrated Cooling Evolution (I.C.Evo)
New Vapor Chamber + Heatpipe Technology
The vaporizing chamber is utilized as cooler base witch is similar to the thermal tubes operating principle. The thermal resistance of vapor chamber is twice lower than in usual base. At low fan speed this technology reduces the CPU temperature by 5~7°C.
- OASIS chipset cooling
OASIS Cooling Technology: additional fanless heat-pipe design
covering the MOSFET modules (VRM), north- and southbridge.
- Memory support
4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
Supports DDR3-1066/1333 SDRAM memory
Supports DDR3-1600 in overclocking mode
Max. 4 GB per DIMM, up to a total size of 16 GB
Warning: DIMMs with voltage over 1.65V may damage your CPU.
Shuttle recommends you install the DIMMs with voltage setting below 1.6V.
- Slots
2x PCI-Express x16 Version 2.0 expansion slots
for x16 graphics cards (full 16 lanes each slot)
Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology.
Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.
Supports two single-slot or one double-width graphics card.
- 8-channel audio
7.1 channel High Definition Audio with Realtek ALC888 codec
analog: line-out (8-ch), line-in, microphone, CD-in, AUX
digital: optical S/PDIF-out
- Dual Gigabit LAN Controller
2x RJ45 connectors supports Teaming-Mode**)
Realtek RTL8111C Ethernet network controller
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s operation
Supports Wake-on-LAN
- Drive connectors
Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
3x internal (SATA) plus 3x external (eSATA)
Intel Matrix Storage Technology enabled striping and mirroring
Supports RAID mode 0, 1, 5, 10
Supports Native Command Queuing (NCQ)
1x IDE ATA 133 drives
- Front Panel connectors
Microphone
Headphone (Line-out)
2x USB 2.0
External Serial ATA Hotplug (eSATA)
Power button
Reset button
Power indicator (blue LED)
HDD indicator (orange LED)
- Back Panel connectors
6x USB 2.0
2x GigaBit LAN (RJ45)
2x External Serial ATA Hotplug (eSATA)
Power connector for two eSATA hard disks (incl. cable)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in
Digital Audio: optical S/PDIF output
Clear CMOS button
- Optional Accessories
Wireless LAN Antenna (PN20)
PS/2 Mouse & Keyboard connectors (PS10)
- Other connectors
6x USB 2.0 (three sets with 2x5 pins)
2x fan connectors (4 pins and 3 pins)
Headers for PS/2 mouse and PS/2 keyboard
- Accessories
Driver CDROM
Quick Installation Guide
1x SATA cable
1x Power cord
2x2 pin to 2 eSATA power cable
Screws
Heatsink compound
- Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
|
